• The economical choice for smaller areas
• Primary and Secondary Thermal Safeguards
  - Commercial grade high temperature manual reset
  - Over temperature one-time thermal device
• Nichrome coil element for quick heat
• Powder coat paint process eliminates sharp metal edges
• Wall can designed for ease of installation

Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 120V, 208V, and dual field rated from 208V to 240V. A painted 20 gauge wall mounting can with six knockouts and 34 cubic inch wiring compartment shall be provided with each complete heater. Each complete heater shall be of unitized construction and attach to the wall can with a single screw and shall be self-contained and completely separate from the wall mounting can. Element is of nichrome type wire wrapped on mica insulators with an over- sized 25 amp rating at 240V, high temperature manual reset limit switch and an over-temperature thermal back-up. A two stage centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 20-gauge construction and finished with a powder coat paint system.

Technical Information:
Fan heaters and thermostats work best when installed on an inside wall. UL requires heater to be placed a minimum distance of 6" from adjacent surfaces and 41/2" from the floor. Manufacturer recommends installation 12" from all surfaces. Models without built-in thermostat, 1500 watts or less may be ceiling mounted. A 3' (91.44cm) minimum clearance is recommended for furniture or other objects placed directly in front of heater.

NOTE: Manufacturer recommends installing heater assembly after walls are finished. However, if installation is necessary before walls are finished, use the paint mask provided. Heater must be cleaned every six months minimum.

Ordering Information:
Suffix "T" in model number denotes built-in single pole thermostat. Model numbers without a "T" require a thermostat. Recommended for elevations under 7500 feet. Complete unit available in white only.


Rough In Dimensions: 8"W x 10.25"H x 4"D
Wall Can Dimensions: 7.875"W x 11.5"H x 4"D
Grill Dimensions: 9"W x 12"H

Part#	Model#	Description	240V	Watts 120V	208V	240V	Amps 120V	208V
67505	CC102TW	Complete Unit w/Thermostat	1000		750	4.17		3.61
67506	CC152TW	Complete Unit w/Thermostat	1500		1125	6.25		5.41
67507	CC202TW	Complete Unit w/Thermostat	2000		1500	8.33		7.21
67508	CC101TW	Complete Unit w/Thermostat		1000			8.33
67509	CC151TW	Complete Unit w/Thermostat		1500			12.50